
Fábricas y red de fabricación
Our Shenzhen team coordinates PCB production with the Meizhou partner site and other factories selected for the build. Production scope and qualifications are confirmed for the assigned site.
Confirmamos por proyecto el socio de producción, la autorización, las cualificaciones y los entregables.
Flujo de fabricación de PCB rígidos
The process runs from laminate preparation through electrical test and final inspection.
Cortar
Paneles laminados cortados al tamaño de trabajo.
Imágenes de la capa interna
Patrones de capas internas fotografiados y grabados, luego verificados por AOI.
Laminación
Núcleos y preimpregnaciones prensados en la pila multicapa.
Perforación
Perforación mecánica y láser de agujeros y vías.
Revestimiento
Metalización de agujeros y cobreado.
Imágenes de la capa exterior
Patrones de capas exteriores fotografiados, grabados y verificados por AOI.
Máscara de soldadura y leyenda
Máscara de soldadura y serigrafía aplicada.
Acabado superficial
ENIG, oro duro, estaño o plata por inmersión, OSP y otros.
Perfilado
Mecanizado de fresado, corte en V y contorno.
Prueba eléctrica e inspección final
Prueba de sonda volante o de fijación, inspección final y embalaje.

Rigid-flex boards bring two constructions together
The rigid-flex process prepares the FR-4 rigid section, flexible copper-clad laminate, coverlay and other lamination materials along separate paths. The flexible circuit is patterned and inspected before the coverlay is applied. The rigid and flexible sections are then combined in the specified order and laminated.
After lamination, the process uses X-ray for target location before subsequent drilling and profiling. The agreed construction determines where to remove material or control routing depth so the flexible section can be released. The board then goes through electrical test, final quality inspection and packing.
A rigid-flex drawing therefore needs more than an overall outline. It should show which layers continue through the flex region, where the coverlay and stiffeners sit, and the boundaries between rigid and flexible sections. These details affect both the build sequence and the points checked on the finished board.
What to confirm for each board family
Use the board family and production stage to identify what engineering needs to check.
| Board family | Engineering review points |
|---|---|
| Circuitos flexibles | Confirm the flex material, copper thickness, coverlay and stiffeners. |
| Conventional rigid boards | Check layer count, finished thickness, trace and space, copper weight, hole size and the required impedance tolerance against the intended construction. |
| Rigid-flex boards | Confirm the rigid and flexible layer arrangement and any air-gap, asymmetric or HDI structure. Review alignment, the coverlay and the flex release process together. |
| High-frequency and high-speed boards | Confirm the material system, hybrid lamination, hole geometry and impedance targets. |



