การผลิต

กระบวนการและขีดความสามารถการผลิต PCB

ดูวิธีผลิต PCB แข็งและแข็งผสมอ่อน รวมถึงขีดจำกัดต้นแบบ วัสดุ และการตรวจที่ต้องยืนยันก่อนผลิต

ต้าเหลียน · จูไห่ · เซินเจิ้นหนิงโป · อู่ฮั่นเครือข่ายพันธมิตรที่ผ่านการรับรอง
สายการผลิต PCB

โรงงานและเครือข่ายการผลิต

Our Shenzhen team coordinates PCB production with the Meizhou partner site and other factories selected for the build. Production scope and qualifications are confirmed for the assigned site.

ยืนยันคู่ค้าผู้ผลิต ขอบเขตสิทธิ์ คุณสมบัติ และสิ่งส่งมอบสำหรับแต่ละโครงการ

ขั้นตอนการผลิต PCB ที่เข้มงวด

The process runs from laminate preparation through electrical test and final inspection.

  1. งานตัด

    แผงลามิเนต ตัดตามขนาดใช้งาน

  2. การถ่ายภาพชั้นใน

    รูปแบบชั้นในที่ถ่ายภาพและแกะสลัก จากนั้นตรวจสอบโดย AOI

  3. การเคลือบ

    แกนและพรีเพกถูกกดลงในสแต็กหลายชั้น

  4. การเจาะ

    การเจาะรูและจุดแวะด้วยกลไกและด้วยเลเซอร์

  5. การชุบ

    การชุบโลหะและการชุบทองแดง

  6. การถ่ายภาพชั้นนอก

    รูปแบบชั้นนอกที่ถ่ายภาพ สลัก และตรวจสอบโดย AOI

  7. หน้ากากประสาน&ตำนาน

    ใช้หน้ากากประสานและซิลค์สกรีน

  8. การตกแต่งพื้นผิว

    ENIG, ทองคำแข็ง, ดีบุกแช่หรือเงิน, OSP และอื่นๆ

  9. การทำโปรไฟล์

    การกำหนดเส้นทาง, V-cut และโครงร่าง

  10. การทดสอบทางไฟฟ้าและการตรวจสอบขั้นสุดท้าย

    การทดสอบการบินโพรบหรือฟิกซ์เจอร์ การตรวจสอบขั้นสุดท้ายและการบรรจุ

Layer arrangement for a rigid-flex board

Rigid-flex boards bring two constructions together

The rigid-flex process prepares the FR-4 rigid section, flexible copper-clad laminate, coverlay and other lamination materials along separate paths. The flexible circuit is patterned and inspected before the coverlay is applied. The rigid and flexible sections are then combined in the specified order and laminated.

After lamination, the process uses X-ray for target location before subsequent drilling and profiling. The agreed construction determines where to remove material or control routing depth so the flexible section can be released. The board then goes through electrical test, final quality inspection and packing.

A rigid-flex drawing therefore needs more than an overall outline. It should show which layers continue through the flex region, where the coverlay and stiffeners sit, and the boundaries between rigid and flexible sections. These details affect both the build sequence and the points checked on the finished board.

What to confirm for each board family

Use the board family and production stage to identify what engineering needs to check.

Board familyEngineering review points
วงจรที่ยืดหยุ่นConfirm the flex material, copper thickness, coverlay and stiffeners.
Conventional rigid boardsCheck layer count, finished thickness, trace and space, copper weight, hole size and the required impedance tolerance against the intended construction.
Rigid-flex boardsConfirm the rigid and flexible layer arrangement and any air-gap, asymmetric or HDI structure. Review alignment, the coverlay and the flex release process together.
High-frequency and high-speed boardsConfirm the material system, hybrid lamination, hole geometry and impedance targets.

ส่งข้อกำหนด PCB และวัสดุของคุณ

  • ทบทวนข้อกำหนดผลิตภัณฑ์ การจัดหา และการผลิตก่อนเสนอราคา
  • แยกจำนวนและข้อกำหนดของต้นแบบกับการผลิตจริง
  • ตกลงการตรวจ เอกสาร และการส่งมอบตามคำสั่งซื้อ