Tillverkning

Processer och kapacitet för kretskortstillverkning

Se hur styva kort och rigid-flex-kort byggs och vad som ska bekräftas om prototypgränser, material och kontroll före produktion.

Dalian · Zhuhai · ShenzhenNingbo · WuhanKvalificerat partnernätverk
PCB produktionslinje

Fabriker och tillverkningsnätverk

Our Shenzhen team coordinates PCB production with the Meizhou partner site and other factories selected for the build. Production scope and qualifications are confirmed for the assigned site.

Produktionspartner, mandat, kvalifikationer och leveransomfattning bekräftas för varje projekt.

Stelt PCB-tillverkningsflöde

The process runs from laminate preparation through electrical test and final inspection.

  1. Skärning

    Laminatpaneler skurna till arbetsstorlek.

  2. Innerskiktsavbildning

    Mönster i inre lager avbildade och etsade, kontrollerade sedan av AOI.

  3. Laminering

    Kärnor och prepregs pressade in i flerskiktsstapeln.

  4. Borrning

    Mekanisk och laserborrning av hål och vior.

  5. Plätering

    Hålmetallisering och kopparplätering.

  6. Yttre lager avbildning

    Mönster i yttre lager avbildade, etsade och kontrollerade av AOI.

  7. Lödmask & legend

    Lödmask och silkscreen applicerad.

  8. Ytfinish

    ENIG, hårt guld, nedsänkt tenn eller silver, OSP och andra.

  9. Profilering

    Fräsning, V-snitt och konturbearbetning.

  10. Eltest & slutbesiktning

    Flygande sond eller fixturtest, slutinspektion och packning.

Layer arrangement for a rigid-flex board

Rigid-flex boards bring two constructions together

The rigid-flex process prepares the FR-4 rigid section, flexible copper-clad laminate, coverlay and other lamination materials along separate paths. The flexible circuit is patterned and inspected before the coverlay is applied. The rigid and flexible sections are then combined in the specified order and laminated.

After lamination, the process uses X-ray for target location before subsequent drilling and profiling. The agreed construction determines where to remove material or control routing depth so the flexible section can be released. The board then goes through electrical test, final quality inspection and packing.

A rigid-flex drawing therefore needs more than an overall outline. It should show which layers continue through the flex region, where the coverlay and stiffeners sit, and the boundaries between rigid and flexible sections. These details affect both the build sequence and the points checked on the finished board.

What to confirm for each board family

Use the board family and production stage to identify what engineering needs to check.

Board familyEngineering review points
Flexibla kretsarConfirm the flex material, copper thickness, coverlay and stiffeners.
Conventional rigid boardsCheck layer count, finished thickness, trace and space, copper weight, hole size and the required impedance tolerance against the intended construction.
Rigid-flex boardsConfirm the rigid and flexible layer arrangement and any air-gap, asymmetric or HDI structure. Review alignment, the coverlay and the flex release process together.
High-frequency and high-speed boardsConfirm the material system, hybrid lamination, hole geometry and impedance targets.

Skicka dina krav på kretskort och material

  • Granskning av produkt, inköp och produktion före offert
  • Separata antal och krav för prototyp och serie
  • Kontroll, dokumentation och leverans avtalas per order