
Review thick copper alongside the geometry
High copper weight affects etching and the available spacing. Identify the tightest trace separation, relevant connections and hole construction. Mark distinct power and control zones on a shared board.
Use the rigid PCB capability by stage
The published rigid table lists copper weight from 1/3 to 12 oz for prototypes and 1/3 to 8 oz for production. Check the combination with your layer structure and inspection requirements.
- Copper weight by layer
- Trace width and spacing for current
- Thermal paths and via arrays
- Mixed copper weights on one board
Copper weight by board type
| Parameter | Prototype | Mass production |
|---|---|---|
| Rigid — Copper weight | 1/3–12 oz | 1/3–8 oz |
| Rigid — Finished board thickness | 0.2–15.0 mm | 0.3–7.0 mm |
| Rigid-flex — Copper weight | 1/3–3 oz | 1/3–2 oz |
Prototype and mass-production values are listed separately and are not interchangeable. Every value is confirmed against your files, the selected material and the assigned facility during engineering review.
Typical applications
Power supplies and converters
Motor drives and battery systems
Industrial power distribution
What to send for a PCB review
Start with the details you have — engineering will request anything else needed for the review.
Files and details for a PCB review
- Gerber (RS-274X) or ODB++ data with drill files
- Fabrication drawing with material, thickness and finish
- Stack-up and impedance targets, if any
- Quantity for prototype and for production
- Special requirements such as IPC class, testing or packaging
Technical files stay private
Gerber files, BOMs and drawings are handled privately and shared within your project.
Heavy Copper PCB FAQs
What copper weight can you build?
Copper weight depends on the full design and is confirmed in engineering review for each project.
Can heavy and standard copper be combined?
Mixed copper constructions are reviewed per design.



