Advanced PCB · Advanced Materials

Isola Low-Loss Laminates for High-Speed PCBs

Compare available Isola grades against link loss, layer geometry and the approved materials list.

High-speed / low-loss
Multilayer panel with gold finish

Compare grades under the specified test conditions

Isola's product guide lists Tachyon 100G at Dk 3.04 at 2 GHz and 3.02 at 10 GHz, with Df 0.0021 at both frequencies. Compare candidates at the same frequency and under the same test conditions, then check dielectric thickness, copper and impedance in your stack-up.

Check the design impact before a substitution

Provide approved grades or allowed alternatives. Identify which thickness or loss requirements are fixed and which trace geometry can change, then review the affected verification plan.

  • Grade selection for your signal requirements
  • Stack-up planning
  • Thermal and assembly compatibility
  • Material availability

Isola laminates

MaterialFrequencyDkDf
Isola I-Tera MT402 GHz3.450.0031
Isola I-Tera MT405 GHz3.450.0031
Isola I-Tera MT4010 GHz3.450.0031
Isola I-Tera MT40 RF/MW10 GHz3.380.0028
Isola I-Tera MT40 RF/MW10 GHz3.450.0031
Isola I-Tera MT40 RF/MW10 GHz3.60.0035
Isola I-Tera MT40 RF/MW10 GHz3.750.0035
Isola Tachyon 100G2 GHz3.040.0021
Isola Tachyon 100G10 GHz3.020.0021

Each row links to the manufacturer's data. Check the specific construction and test method before using these reference values in a stack-up.

Typical applications

High-speed computing

Networking equipment

Test hardware

What to send

Helpful details for advanced designs

  • Target frequency, data rate and loss budget
  • Impedance targets and tolerances
  • Preferred or approved materials
  • Via structure and back drilling layers
  • Test and inspection requirements

Start a project

Send your files and planned quantities. We will confirm the open engineering points before quoting.

Isola FAQs

Can you suggest an equivalent material?

Engineering can review alternatives, and substitutions are only used with your approval.

Are datasheet values guaranteed?

Supplier values are material data, not fabrication guarantees.

Send your PCB and material requirements

  • Review of product, sourcing and production requirements before quotation
  • Separate quantities and requirements for prototype and production
  • Inspection, documents and delivery agreed for the order