PCB samples

PCB Samples with Stack-Up and Process Details

Compare an 18-layer radar board, an 18-layer high-speed server board and a 12-layer rigid-flex industrial connector sample.

Radar and server samples

The 77 GHz radar sample combines TSM-DS3, FR28 prepreg and S1000-2M with blind and buried vias and five back-drill groups. The MEGTRON 8 server sample has a 3.1 mm thickness, a 0.15 mm minimum hole and full-board electrolytic hard gold.

Rigid-flex industrial connector sample

The 12-layer sample uses a 4R + 4F + 4R stack with ITEQ IT-180 and DuPont AP9141R. It is 1.6 mm thick with a 0.2 mm minimum hole. Bring your own installation drawing to check the applicable construction.

PCB for a base-station power amplifier

Special processes follow the application

For communications and RF equipment, a design may need a hybrid stack-up, controlled impedance and back drilling. A power electronics board may instead call for heavier copper, a metal base or embedded copper. A flexible circuit for imaging or a sensor assembly may use a stiffener or shielding film only where the mechanical design calls for it.

The examples cover boards for communications, servers, automotive electronics, industrial control, imaging and medical electronics. These applications help frame the engineering questions. For example, a server board may need a low-loss laminate and a carefully defined via structure, while an industrial connector can depend on how rigid and flexible layers are joined.

Five board examples and the decisions behind them

Send your PCB and material requirements

  • Review of product, sourcing and production requirements before quotation
  • Separate quantities and requirements for prototype and production
  • Inspection, documents and delivery agreed for the order