Industries · Applications

Automotive PCB Fabrication for Control Units and Radar

Review the operating environment, traceability and manufacturing scope for automotive controllers, radar and sensor boards.

Automotive / radar
Vehicle cockpit electronics

See the construction of a 77 GHz sample

A company sample uses an 18-layer hybrid stack of TSM-DS3, FR28 prepreg and S1000-2M. It combines blind and buried vias, controlled impedance and five back-drill groups.

Check the certificate against the site and scope

Specify the required IATF 16949 coverage, the assigned PCB facility, lot identification and change controls. The recorded certification scope covers PCB fabrication to customer design, with product design excluded.

  • High-Tg and RF material options
  • Traceability requirements
  • Process and change control
  • Inspection and test needs

Typical automotive modules

Typical requirements from the ShinePCB application capability sheet. Each project is reviewed against its own drawing and specification.

End product / typical modulesApplicable PCB typesKey processesMaterial directionEngineering focus
ADAS / domain controllers — SoC, high-speed memory, camera interfaces, Ethernet, powerHigh-layer-count, HDI, high-speed, rigid-flexAny-layer / high-order HDI; impedance; back drilling; POFV; fine linesAutomotive-grade high-Tg FR-4; low-loss; CAF-resistantThermal cycling; vibration; traceability; signal integrity
77/79 GHz mmWave radar — RF antenna board, RF front end, digital processingHigh-frequency, hybrid high-frequency, HDIHybrid lamination; fine lines; impedance; layer registrationRogers / Isola / Taconic microwave materials; low-loss FR-4Dk/Df consistency; copper roughness; etch compensation; warpage
BMS / cell contact systems — main control, sampling, balancing, HV interfaceHeavy copper, high-layer-count, FPC, rigid-flexHeavy copper; high current; high-voltage spacing; long boards; press-fit holesHigh-Tg / CAF-resistant FR-4; FPC; high thermal conductivityHigh-voltage safety; temperature rise; insulation; traceability
In-vehicle cameras / cockpit — camera module, display control, SerDesHDI, FPC, rigid-flex, high-speed multilayerFine lines; laser vias; impedance; rigid-flex; via-in-pad; thin boardsThin high-Tg FR-4; low-loss; FPC materialsMiniaturization; bending; high-speed links; cleanliness

Application descriptions show typical board requirements. They are not customer references, and end-product standards remain the responsibility of the product owner. IATF 16949 scope: manufacturing of printed circuit boards (clause 8.3 product design excluded).

Board Examples

18-layer hybrid stack-up of a 77 GHz radar board

77 GHz radar high-frequency board

Layers
18
Materials
TSM-DS3 + FR28 prepreg + S1000-2M, hybrid lamination
Finish
Immersion gold (ENIG)
Special process
Blind and buried vias, controlled impedance and 5 back-drill groups

Board Examples

Typical products

Body and control modules

Radar and camera sensors

Lighting and power electronics

Automotive Electronics FAQs

Is manufacturing IATF 16949 certified?

PCB manufacturing is IATF 16949-certified for boards built to customer design. Scope details are provided in formal documents.

Can you support PPAP documentation?

Documentation requirements are clarified before quotation.

Send your PCB and material requirements

  • Review of product, sourcing and production requirements before quotation
  • Separate quantities and requirements for prototype and production
  • Inspection, documents and delivery agreed for the order