
Specify the connector field first
For press-fit connectors, include the manufacturer specification and finished-hole tolerances. Align board outlines, fasteners and connector locations to the chassis drawing.
Define critical channels separately
Give impedance, reference layers and allowable via stubs for critical paths. For back drilling, specify the hole groups, target layers and verification requirements.
- Stack-up and overall thickness
- Press-fit hole requirements
- Back drilling for high-speed channels
- Flatness and handling for large boards
Backplane-related limits
| Parameter | Prototype | Mass production |
|---|---|---|
| Layer count | Confirmed per project | Confirmed per project |
| Back drilling | Supported | Supported |
| Rigid — Finished board thickness | 0.2–15.0 mm | 0.3–7.0 mm |
| Rigid — Max aspect ratio | 35:1 | 30:1 |
| Max backplane size | Confirmed per project | Confirmed per project |
Prototype and mass-production values are listed separately and are not interchangeable. Every value is confirmed against your files, the selected material and the assigned facility during engineering review. Backplane layer count is confirmed with the stack-up and build requirements.
Typical applications
Telecom and data center chassis
Test systems
Industrial computing racks
What to send for a PCB review
Start with the details you have — engineering will request anything else needed for the review.
Files and details for a PCB review
- Gerber (RS-274X) or ODB++ data with drill files
- Fabrication drawing with material, thickness and finish
- Stack-up and impedance targets, if any
- Quantity for prototype and for production
- Special requirements such as IPC class, testing or packaging
Technical files stay private
Gerber files, BOMs and drawings are handled privately and shared within your project.
Backplane PCB FAQs
Do you review press-fit requirements?
Yes. Share the connector specifications and hole requirements for review.
Is back drilling required?
It depends on your data rates and via stubs. Engineering discusses it during review.



