Advanced PCB · Advanced Materials

Rogers RF Laminates and Hybrid PCB Stack-Ups

Select a Rogers grade by operating frequency, dielectric thickness and loss target. Specify where it meets FR-4 or another laminate.

RF / microwave
RO4350B + FR-4 power amplifier boards

Choose the grade for the layer construction

The archived eight-layer antenna sample uses RT5880. The 5G amplifier sample combines RO4350B and FR-4 with local embedded copper. Give the RF layer positions and any thermal or dimensional constraint before comparing these options.

Give the quote usable material inputs

Provide approved grades, dielectric thickness, copper requirements and allowed alternatives. Compare typical Dk and Df under the stated test conditions, then agree on finished-board verification.

  • Grade selection for your targets
  • Hybrid stack-ups with FR-4
  • Processing requirements
  • Material availability

Builds on Rogers materials

Compare stack-up, hole geometry and inspection requirements with your design.

18-layer hybrid stack-up of a 77 GHz radar board

77 GHz radar high-frequency board

Layers
18
Materials
TSM-DS3 + FR28 prepreg + S1000-2M, hybrid lamination
Finish
Immersion gold (ENIG)
Special process
Blind and buried vias, controlled impedance and 5 back-drill groups
Panels of black high-speed server boards

AI server high-speed board

Layers
18
Material
Panasonic MEGTRON 8
Thickness / min hole
3.1 mm / 0.15 mm
Finish
Full-board electrolytic hard gold
Challenge
High layer count, blind vias, thick gold over the full board
Rigid-flex boards with flexible interconnect

12-layer rigid-flex board

Structure
12 layers, 4R + 4F + 4R
Materials
ITEQ IT-180 + DuPont AP9141R
Thickness / min hole
1.6 mm / 0.2 mm
Finish
Immersion gold (ENIG)
Application
High-end industrial connector
Round gold-finished millimeter-wave antenna board

Millimeter-wave antenna board

Layers
8
Material
Rogers RT5880
Finish
Soft gold plating, 3 µm gold
Special process
Laser profiling
Stack of gold-finished RF power amplifier boards

5G base-station power amplifier board

Layers
4
Materials
Rogers RO4350B + FR-4
Finish
Immersion gold (ENIG)
Special process
Blind vias, step cavity, partially embedded copper block

Board Examples

Typical applications

Antennas and RF modules

Radar sensors

Satellite and wireless equipment

What to send

Helpful details for advanced designs

  • Target frequency, data rate and loss budget
  • Impedance targets and tolerances
  • Preferred or approved materials
  • Via structure and back drilling layers
  • Test and inspection requirements

Start a project

Send your files and planned quantities. We will confirm the open engineering points before quoting.

Rogers FAQs

Can I specify an exact Rogers grade?

Yes. Specify the grade and we will confirm availability and processing during review.

Are datasheet values guaranteed?

Supplier values are material data, not fabrication guarantees.

Start your OEM or EMS project

  • Review of product, sourcing and production requirements before quotation
  • Separate quantities and requirements for prototype and production
  • Inspection, documents and delivery agreed for the order