
Give the power and control sections different inputs
For the power stage, specify copper weight, electrical spacing, cooling and operating voltage. For control and encoder interfaces, identify connectors, orientation and the conditions for board-level tests.
Check the board against the housing
A company connector sample uses a 12-layer 4R + 4F + 4R rigid-flex structure with ITEQ IT-180 and DuPont AP9141R. Specify bend zones, installation position and stiffeners for your design. For a complete unit, add harnesses, panel openings and the acceptance procedure.
- Heavy copper and high-Tg options
- Reliability requirements
- Connector and mechanical needs
- Box build scope
Typical industrial and robotics modules
Typical requirements from the ShinePCB application capability sheet. Each project is reviewed against its own drawing and specification.
| End product / typical modules | Applicable PCB types | Key processes | Material direction | Engineering focus |
|---|---|---|---|---|
| PLC / DCS controllers — CPU, I/O, communication and power boards | High-layer-count, HDI, heavy copper | Impedance; high-speed differential; POFV; back drilling; heavy copper | High-Tg FR-4; low-loss; CAF-resistant | Wide temperature; long-term supply; vibration; isolation |
| Servo drives / inverters — control, power, encoder interface | Heavy copper, high-layer-count, metal core, rigid-flex | Heavy copper; high current; high-voltage spacing; resin plugging; thermal structures | High-Tg FR-4; high thermal conductivity; halogen-free | Power cycling; heat dissipation; creepage; EMC |
| Machine vision / industrial cameras — image acquisition, FPGA, high-speed interfaces | High-speed multilayer, HDI, rigid-flex | Fine lines; impedance; back drilling; via-in-pad | Low-loss; high-Tg FR-4; FPC materials | High-speed imaging; low noise; thermal management |
| Robot controllers — main control, real-time Ethernet, safety I/O | High-layer-count, HDI, rigid-flex | Impedance; back drilling; POFV; heavy copper; press-fit holes | High-Tg FR-4; low-loss; CAF-resistant | Real-time control; vibration; long-term supply; traceability |
| PV / energy storage inverters, EV chargers — control, driver, power boards | Heavy copper, high-layer-count, metal core | Heavy copper; high current; high-voltage spacing; thermal structures | High-Tg / CAF-resistant FR-4; high thermal conductivity | Temperature rise; power cycling; insulation; service life |
Application descriptions show typical board requirements. They are not customer references, and end-product standards remain the responsibility of the product owner.
Typical products
PLCs and controllers
Motor drives
Measurement instruments
Related services for drive and control electronics
Industrial Electronics & Drive Electronics FAQs
Can you build complete control units?
Box build and mechanical parts can be coordinated in one project.
How is long-term supply handled?
Component availability is reviewed before quotation.


