Materials · FR-4

FR-4 for PCB Stack-Ups and Lead-Free Reflow

Compare standard, lead-free and halogen-free grades for rigid multilayers by reflow conditions, finished thickness and dielectric requirements.

Tg135 / Tg150 / Tg170Halogen-freeCAF / CTI>600
FR-4 multilayer board

Match a grade to the actual board

Identify approved suppliers, material grades and available thicknesses. List any high-Tg, halogen-free, CAF or CTI requirements on the fabrication drawing.

Check the electrical impact of substitution

Grade or pressed thickness changes can affect trace geometry and loss. Confirm copper, impedance and verification requirements with the revised stack-up.

  • Tg135, Tg150 and Tg170 grades
  • Lead-free and halogen-free options
  • CAF-resistant and CTI>600 materials

Rigid-board limits on FR-4

ParameterPrototypeMass production
Layer count (max)50L36L
Finished board thickness0.2–15.0 mm0.3–7.0 mm
Copper weight1/3–12 oz1/3–8 oz
Min trace / space2.5 / 2.5 mil3 / 3 mil

Prototype and mass-production values are listed separately and are not interchangeable. Every value is confirmed against your files, the selected material and the assigned facility during engineering review.

Need help choosing?

Share these targets for a material review

  • Frequency or data rate
  • Dielectric constant and loss targets
  • Operating and assembly temperatures
  • Finished thickness and copper weights
  • Environment (humidity, CAF, halogen-free)
  • Cost target and volumes

Material selection

Engineering returns candidate materials, trade-off notes and availability questions before quotation.

Send your PCB and material requirements

  • Review of product, sourcing and production requirements before quotation
  • Separate quantities and requirements for prototype and production
  • Inspection, documents and delivery agreed for the order