Compare the same board type and stage
The published rigid PCB layer limits are 50 for prototypes and 36 for production. Minimum trace and space are 2.5 mil each for prototypes and 3 mil each for production. Flex and rigid-flex limits are listed separately.
Check combinations against your design
Thick boards can constrain small holes, thick copper can constrain spacing, and laminate changes can affect impedance. Compare the complete stack and drill data with the assigned facility.
Capability tables
Select your board type and use the column for the intended production stage. Each limit is listed by parameter. Confirm the combination of limits for your design during review.
| Parameter | Prototype | Mass production |
|---|---|---|
| Layer count (max) | 50L | 36L |
| Finished board thickness | 0.2–15.0 mm | 0.3–7.0 mm |
| Thickness tolerance | ±8% | ±8% |
| Min trace / space | 2.5 / 2.5 mil | 3 / 3 mil |
| Min hole-to-trace clearance | 5 mil | 5 mil |
| Copper weight | 1/3–12 oz | 1/3–8 oz |
| Layer registration accuracy | 0.8 mil | 1 mil |
| Min through-hole diameter | 0.075 mm | 0.10 mm |
| Min blind via diameter | 0.05 mm | 0.075 mm |
| Max aspect ratio | 35:1 | 30:1 |
| Etching tolerance | ±10% / ±0.8 mil | ±10% / ±1 mil |
| Min solder mask bridge | 2 mil | 3 mil |
| Impedance control tolerance | ±5% | ±7% |
| HDI level | 9th order | 5th order |
| Surface finish | ENIG, electrolytic gold, HASL, Ni/Pd/Au, thick electrolytic gold, immersion tin, immersion silver, OSP, carbon | ENIG, electrolytic gold, HASL, Ni/Pd/Au, thick electrolytic gold, immersion tin, immersion silver, OSP, carbon |
| Material types | Shengyi, TUC, 建涛, Nan Ya, ITEQ, Rogers, 华正, Elite Material (EMC), Isola (Tg135 / Tg150 / Tg170, CAF resistance, CTI > 600, halogenated and halogen-free) | Shengyi, TUC, 建涛, Nan Ya, ITEQ, Rogers, 华正, Elite Material (EMC), Isola (Tg135 / Tg150 / Tg170, CAF resistance, CTI > 600, halogenated and halogen-free) |
Prototype and mass-production values are listed separately and are not interchangeable. Every value is confirmed against your files, the selected material and the assigned facility during engineering review.
| Parameter | Prototype | Mass production |
|---|---|---|
| Layer count (max) | 20L | 18L |
| Panel size | 400 × 540 mm | 400 × 540 mm |
| Finished board thickness | 0.25–5.0 mm | 0.25–3.2 mm |
| Min trace / space | 1.5 / 1.5 mil | 2 / 2 mil |
| Min hole-to-trace clearance | 4 mil | 5 mil |
| Copper weight | 1/3–3 oz | 1/3–2 oz |
| Layer registration accuracy | 0.8 mil | 1 mil |
| Min through-hole diameter | 0.075 mm | 0.10 mm |
| Min blind via diameter | 0.05 mm | 0.05 mm |
| Max aspect ratio | 16:1 | 12:1 |
| Etching tolerance | ±10% / ±0.8 mil | ±10% / ±1 mil |
| Min solder mask bridge | 2 mil | 3 mil |
| Impedance control tolerance | ±5% | ±7% |
| Surface finish | ENIG, electrolytic gold, HASL, Ni/Pd/Au, thick electrolytic gold, immersion tin, immersion silver, OSP, carbon | ENIG, electrolytic gold, HASL, Ni/Pd/Au, thick electrolytic gold, immersion tin, immersion silver, OSP |
| Supported structures | Symmetrical single-sided flex, multilayer flex, flex gold fingers, air gap, asymmetrical stack-up, HDI, outer-layer flex with press-fit, bookbinder, high-frequency and high-speed | Symmetrical single-sided flex, multilayer flex, flex gold fingers, air gap, asymmetrical stack-up, HDI, outer-layer flex with press-fit, bookbinder, high-frequency and high-speed |
| Material types | Shengyi, 宏仁, 台虹, DuPont, Panasonic, Rogers, ITEQ | Shengyi, 宏仁, 台虹, DuPont, Panasonic, Rogers, ITEQ |
Prototype and mass-production values are listed separately and are not interchangeable. Every value is confirmed against your files, the selected material and the assigned facility during engineering review.
| Parameter | Prototype | Mass production |
|---|---|---|
| Layer count (max) | 12 | 16 |
| Min dielectric thickness | 12.5 µm | 12.5 µm |
| Min BGA pitch | 150 µm | 100 µm |
| Min board thickness | 50 µm | 50 µm |
| Max panel size | 610 × 1200 mm | 610 × 1200 mm |
| Base copper thickness | 9–35 µm | 6–35 µm |
| Min trace / space | 40 / 40 µm | 35 / 35 µm |
| Pattern registration tolerance | ±50 µm | ±20 µm |
| Min pattern-to-edge clearance | 0.10 mm | 0.07 mm |
| Etching tolerance | ±20 µm | ±15 µm |
| Min through-hole diameter | 0.10 mm | 0.075 mm |
| Min blind via diameter | 0.05 mm | 0.05 mm |
| Hole position tolerance | ±0.05 mm | ±0.05 mm |
| Impedance control tolerance | ±10% | ±5% |
| Outline tolerance | ±0.10 mm | ±0.05 mm |
| Surface finish | HASL, ENIG, immersion silver, OSP, Ni/Pd/Au, electrolytic gold | HASL, ENIG, immersion silver, OSP, Ni/Pd/Au, electrolytic gold |
| Stiffener type | FR-4, PI, stainless steel | FR-4, PI, stainless steel |
| Stiffener registration tolerance | ±0.20 mm | ±0.10 mm |
| HDI capability | 4-layer any-layer interconnect | 6-layer any-layer interconnect |
| LCP material | Supported | Supported |
Prototype and mass-production values are listed separately and are not interchangeable. Every value is confirmed against your files, the selected material and the assigned facility during engineering review.
| Parameter | Prototype | Mass production |
|---|---|---|
| Material system | PTFE + ceramic, PTFE + glass fiber + ceramic, PTFE + glass fiber | PTFE + ceramic, PTFE + glass fiber + ceramic, PTFE + glass fiber |
| Layer count (max) | 24L | 20L |
| Panel size (max) | 850 × 700 mm | 720 × 650 mm |
| Profile tolerance | ±0.05 mm | ±0.10 mm |
| Slot tolerance | Normal slot ±0.08 mm, short slot ±0.10 mm | Normal slot ±0.10 mm, short slot ±0.13 mm |
| Layer registration | 2 mil | 3 mil |
| Hybrid lamination | PTFE + hydrocarbon ceramic + FR-4 | PTFE + hydrocarbon ceramic + FR-4 |
| Min hole size | 0.075 mm | 0.10 mm |
| Min hole-wall spacing | 0.20 mm | 0.25 mm |
| Hole diameter tolerance | ±0.05 mm | ±0.075 mm |
| Max aspect ratio | 16:1 | 12:1 |
| Hole copper uniformity | COV ≤ 5% | COV ≤ 7% |
| Resin-filled via aspect ratio | 12:1 | 12:1 |
| Resin-filled via type | Through holes, blind and buried vias | Through holes, blind and buried vias |
| Trace width tolerance | ±0.6 mil | ±1 mil |
| Impedance tolerance | ±5% | ±8% |
| Warpage | 0.50% | 0.75% |
| Special processes | POFV (VIPPO), hybrid and local hybrid lamination, long/short, stepped and segmented gold fingers, stepped slots, back drilling, sidewall metallization, N+N, double-sided press-fit mechanical blind vias, local thick copper, high-temperature lamination, copper/silver paste via filling, skip vias, HDI | POFV (VIPPO), hybrid and local hybrid lamination, long/short, stepped and segmented gold fingers, stepped slots, back drilling, sidewall metallization, N+N, double-sided press-fit mechanical blind vias, local thick copper, high-temperature lamination, copper/silver paste via filling, skip vias, HDI |
| Material brands | Shengyi, ITEQ, TUC, Panasonic (M4/M6/M7/M8), Rogers, Taconic, Wangling, 睿龙, 国能 | Shengyi, ITEQ, TUC, Panasonic (M4/M6/M7/M8), Rogers, Taconic, Wangling, 睿龙, 国能 |
Prototype and mass-production values are listed separately and are not interchangeable. Every value is confirmed against your files, the selected material and the assigned facility during engineering review.
Product line and advanced processes
Supported board types
- Single and double-sided PCB
- Multilayer PCB
- HDI PCB
- High-frequency and RF microwave PCB
- High-speed PCB
- Flexible PCB (FPC)
- Rigid-flex PCB
- Heavy copper PCB
- Metal core PCB (aluminum / copper base)
- Ceramic PCB
- Backplane PCB
- Prototype and quick-turn
Advanced processes
- Solder mask plugged via
- Resin plugged via
- Plated via fill
- Copper filled via
- POFV / VIPPO
- Sequential lamination
- Local hybrid lamination
- N+N structure
- Long / short gold finger
- Counterbore
- Back drilling
- Sidewall metallization
- Edge plating
- Carbon ink
- High layer count
Values not yet published
Some parameters — for example back-drill stub length, routed outline tolerance, maximum backplane size and metal core thermal conductivity — are confirmed per project during engineering review.
What to send for a PCB review
Start with the details you have — engineering will request anything else needed for the review.
Files and details for a PCB review
- Gerber (RS-274X) or ODB++ data with drill files
- Fabrication drawing with material, thickness and finish
- Stack-up and impedance targets, if any
- Quantity for prototype and for production
- Special requirements such as IPC class, testing or packaging
Technical files stay private
Gerber files, BOMs and drawings are handled privately and shared within your project.


